On rare occasions,
when the temperature
is too high, the air conditioner
not be able to evaporate
all of the water as quickly as needed. All moisture that is unable
to be evaporated
in a water tank inside the unit. When the tank is completely
an alarm will sound, the compressor
will shut off, and the bucket full icon will light up on
panel. To empty the tank, please follow the instructions below.
10mm (.4") Internal
Drain Hose CtEp
Remove the pre-installed
Drain Cap from the unit (Fig 11).
A. Drain Port
B. Drain Cap
the Clamp with the provided
Screw (Fig. 12).
A, Drain Port
the Drain Hose to the Drain Port using the Drain Hose Clip. Insert the Drain Plug
into the free end of the Drain Hose and guide the Drain Hose through the Clamp. Once
finished, the unit can be easily drained
by removing the drain plug and guiding the
drain hose into a small pan to drain the water (Fig. 13).
A. Drain Plug
B, Drain Port
C. Drain Hose
D. Drain Hose Clip