To prevent injury to the user or other people and property
instructions must be followed.
Use this appliance
only as described
in this Use & Care Guide. As with
the instructions aim to cover as many eventuali-
ties as possible. Caution and common sense should be used when operat-
ing and installing
this air conditioner.
has been manufactured
to cool and dehumidify
and should not be used for other purposes.
should not be installed where the atmosphere
gases, oil or sulfur, or near heat sources.
Always install the portable
may cause failure to operate including
injury, fire and
electric shock hazards.
Do not place the power cord near a heater. It may cause fire or electric
Do not use the power cord near flammable
gas or combustibles
gasoline, benzene, thinner, etc. it may cause explosion or fire.
Do not operate or stop the unit by inserting or pulling out the power
plug. It may cause fire or electric shock.
Do not damage
or use an unspecified
power cord. It may cause fire or
Do not modify the length of the power cord. It will cause fire or electric
shock due to heat generation.
Use the air conditioner
on a single outlet circuit. Do not share the outlet
with other appliances.
It may cause circuit failure.
the outlet without
making the appropriate
wiring changes will
create an unsafe condition
that could result in fire or electric shock. Refer
all such work to a licensed and qualified
must be properly
The power cord
of this appliance
with a three-prong
LCDI (Leakage Current
Detection and Interruption)
plug. To minimize the risk of electric shock,
use the plug with a standard three-slot
wall power outlet. If
power outlet does not include a grounding
slot, have a qualified
cian replace the outlet before you use your room air conditioner.
cut or remove the grounding
prong from the power plug. if you have
doubt whether the air conditioner
have the wall
and circuit checked by a qualified
Do not disassemble or modify
Doing so may cause failure
and electric shock.