Table of Contents
Advertisement
Customising using Setup
For an overview
of Setup, see
page 29
2C
In 500 or 200 mode this tells the D6000 that the source is a controllable
Meridian tuner.
3C
For 200 mode only, this tells the D6000 that the source is a Meridian 232
Multiroom translator.
4C
For 200 mode only, this tells the D6000 that the source is a Meridian 232
controlling a CD changer.
Use the n and s menu keys to select the second part of the display.
Source menu 4 options
Source menu 4 is used only in 500 mode, and to define the comms
address of the source product.
You get to source menu 4 by using the menu e key while in source
menu 1.
The display will be like this:
cd
1A
The first part of the display tells you which key on the MSR you are
setting up. The second part of the display tells you the address. Normally
you should leave this set to '1A' unless advised otherwise by your dealer
or Meridian technical support.
Use the n and s menu keys to select the second part of the display.
Completing Config
When you are happy with your left/right and master/slave choices, and
with your other choices for this speaker:
1. Switch off the D6000, using the power switch on the back
2. After a second, switch the D6000's power on again
Note Ensure that you have set the two speakers to opposite settings. One
must be left, the other right; similarly, one must be the master and the
other a slave. Also ensure that the left speaker is the one with the gold
stripe on the inside on both the base and head.
3. Make a note of your choices by marking both speakers on the back in
the area provided on the label. Use a pencil so that you can change
the marking in future.
Note When customisation is complete, switch the power off, wait for 3
seconds, then switch it on again to restore Normal operation and to save
what you have done.
Features of Setup
Setup provides the additional function:
The Store key takes on a 'Store' capability
How to use Setup
Note It is not necessary to make any adjustments to the slave for Setup.
Customising using Config
D6000 User Guide
35
Advertisement
Table of Contents
