Setup: An Overview - Meridian D6000 User Manual

To use Setup,
see page 35
Config: control settings
In Config, you can make selections that affect the way in which D6000
responds to certain keys. The main choices of this kind are:
left or right
master or slave
multiroom standby option
sort of preamplifier or source switch box in the installation
Config: sources and inputs
In Config you can make decisions about sources, e.g.
how many inputs will be active
which sources you can select
which key on the remote control selects which source
which logo on the D6000 display represents which input
which physical input connection to D6000 will be used

Setup: an overview

Setup mode is quite different from Type or Config in that the speakers
function in this mode. In Setup, the master speaker menus are extended
to give you additional control, so that you can establish sonic preferences.
Setup mode lets you make choices based on extended listening.
The idea behind Setup is that you can choose, while listening,
tilt settings for each source
bass settings for each source
When you are happy with the settings you have chosen, they can be
stored in Setup. You then switch the system back to Normal.
The particular advantage of this system is that other users will not
inadvertently lose the settings you have chosen. When the system is in
Normal mode, the Store key will not store, performing only a recall
function. At any time you can
reset factory default settings, using the Reset key
adjust the settings, using the Menu keys
recall your preferred tone settings with the Store key
Customising D6000: how to
D6000 User Guide
29