Meridian DSP520 User Manual

Meridian DSP520 User Manual

Dsp loudspeaker
Hide thumbs Also See for DSP520:

Advertisement

Quick Links

DSP520/640
DSP Loudspeaker
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Meridian DSP520

  • Page 1 DSP520/640 DSP Loudspeaker User Guide...
  • Page 2: Important Safety Instructions

    AC supply socket outlet with a protective earthing Copyright © 2013 Meridian Audio Ltd. connection (the third grounding pin). Visit us on the Web: The DSP520/640 must be connected to an earthed AC supply socket http://www.meridian-audio.com outlet. Part no: P88411...
  • Page 3: To Prepare For Installation

    DSP520/640 User Guide Installation Contents These instructions assume that a Meridian wall box type RF500/600 has already been mounted in the wall ready to Each DSP520/640 loudspeaker is supplied accept the loudspeaker. If necessary, refer to the RF500/600 with the following components: Wall Box Installation Instructions as appropriate.
  • Page 4 • Clamp the frame to the wall with the M5 x 25 button-head • Lock into place with M5 x 10 button-head screws (DSP520 screws (DSP520 8 pieces, DSP640 12 pieces). 6 pieces, DSP640 8 pieces). Tighten just enough to clamp the frame to the wall. Do not •...
  • Page 5 • Lay the grille gently down onto the magnets, which will hold it • Fix with M5 x 10 button-head screws (DSP520 8 pieces, in place. DSP640 12 pieces). • Remove the grab handle to fit the last pair of screws. This is...
  • Page 6: Front And Back Panel

    IR is on. The loudspeakers are switched on or into standby as appropriate To configure the IR receiver via the SpeakerLink connections by the Meridian system they Hold down one of the following keys on an MSR remote (not are connected to.
  • Page 7 • Make sure the Channel selector is set to the Left position on The DSP520/640 loudspeakers are ideal for a compact Audio the front of the left loudspeaker and to the Right position on Core 200 based home entertainment system.
  • Page 8 RJ45 cables. Meridian Digital Theatre • Make sure the Channel selector on each DSP520/640 is set DSP520/640 loudspeakers are ideal as the front, rear, and to the Left, Right, or Centre position as appropriate.
  • Page 9 Touch, or the Control:PC/Control:Mac application on a computer. • Make sure the Channel selector on each DSP520/640 is set to the Left position on the front of the left loudspeaker and to • Connect the Network sockets from the Media Core 200 and the Right position on the front of the right loudspeaker.
  • Page 10 DSP520/640 User Guide...
  • Page 11 DSP520/640 User Guide...
  • Page 12 DSP520/640 User Guide...

This manual is also suitable for:

Dsp640

Table of Contents