Kenmore 665.15982 User Manual page 14

Hot water dissolves and activates the dishwashing
detergent. Hot water also dissolves grease on dishes and
helps glasses dry spot-free. For best dishwashing results,
water must be at least 120°F (49°C) as it enters the
dishwasher. Loads may not wash as well if the water
temperature is too low.
To check water temperature
1. Run hot water at the faucet closest to your dishwasher
for at least 1 minute.
21 Place a candy or meat thermometer in a glass
measuring cup.
3. Check the temperature on the thermometer as the
water is running into the cup.
4. If the water temperature at the faucet is below 120°F
(49°C), have a qualified person raise the water heater's
thermostat setting.
•
To save water and energy, do not rinse dishes before
putting them into the dishwasher.
•
Use a low energy, quick, or short cycle whenever
possible. These cycles use less hot water and energy
than the Normal cycle.
Use a delay feature (on some models) to run your
dishwasher during oft-peak hours. Local utilities
recommend avoiding heavy usage of energy at certain
times of day.
•
During the summer, run your dishwasher at night to
reduce daytime heat buildup.
Use an air dry, or an energy-saving dry option
whenever possible. Allow longer drying times
(overnight) when using these options. Use a rinse aid to
improve drying.
•
Use cycles or options that add extra heat to the wash
or rinse portion of the cycle only when needed.
•
Run your dishwasher with full loads. Run a rinse cycle
after meals until the dishwasher is full.
L_
Use Favorite Cycle to automatically select the cycle and
options you use most often.
To program or change Favorite Cycle
1. Press the desired cycle, options, and/or delay.
2. Press and hold
for 3 seconds. The FAVORITE CYCLE light glows to
show your selections are saved.
NOTE: If the power is off, or if the door is open for an
extended period of time, the Favorite Cycle settings will
default to the Normal Wash cycle with heated drying.
14