Figure 1-3 Tilt-Stand At Hanging Position - Agilent Technologies U1251B User's And Service Manual

1. Extend the tilt-stand until its maximum reach
4. Re-attach the tilt-stand to an upright position
Agilent U1251B/U1252B User's and Service Guide
To adjust the meter to a hanging position follow the steps
shown in Figure 1- 3

Figure 1-3 Tilt-stand at hanging position

Getting Started Tutorial
below.
2. Detach the tilt-stand
3. Flip the tilt-stand over until this side of
the stand is facing the multimeter as
opposed to facing you
1
5