Using The Keyswitch - Honeywell ADEMCO VISTA-10P User Manual

Using the Keyswitch

Using the Keyswitch
Using the Keyswitch Using the Keyswitch
Using the Keyswitch Using the Keyswitch
Using the Keyswitch Using the Keyswitch
Your system may be equipped with a keyswitch for use when arming and disarming.
Red and green lights on the keyswitch plate indicate the status of your system as
follows:
Green Light: Lights when the system is disarmed and ready to be armed (no
Red Light:
Before arming, close all perimeter doors and windows.
To arm in the AWAY mode:
Turn the key to the right for 1/2 second and
release. Keypads beep twice and the red
indicator lights or flashes.
To arm in the STAY mode:
Turn the key to the right and hold for longer
than 1 second, then release. Keypads beep three
times and the red indicator lights or flashes.
To disarm the system:
Turn the key to the right and release. The red
light turns off
– 18 –
open zones). If the system is disarmed and the green light is off, it
indicates the system is not ready (one or more zones are open).
Lights or flashes when system is armed in AWAY or STAY mode.
See your installer for the meanings of the lit red light:
Lit Steady = system armed AWAY or
system armed STAY and exit delay has expired
Flashing = system armed STAY and exit delay timer active
Rapid flashing = an alarm has occurred (memory of alarm).
GREEN RED
keyswitch-001-V1