Orienting The Camera - D-Link DCS-6314 User Manual

Full hd outdoor fixed dome network camera

Hide thumbs Also See for DCS-6314:

Table of Contents

Section 2: Assembly and Installation

Orienting the Camera

The DCS-6314 can be adjusted to ensure an optimal viewing

position when mounted to a wall by following the steps

outlined.

Step 1

Turn the lens module left and right until the desired position

is achieved.

Step 2

Loosen the tilt screws on both sides of the camera, and turn

the lens module up and down until the desired position is

achieved.

Step 3

Turn the lens to adjust the IP camera's image until the desired

orientation is achieved.

D-Link DCS-6314 User Manual

Table of Contents

Show Quick Links

Table of Contents

Dsc-6314