Mounting The Camera - D-Link DCS-2670L User Manual

Section 2: Installation

Mounting the Camera

To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera before mounting.
Step 1:
Place the baseplate where you want to position the camera and use a pencil to mark the holes.
You can use the large holes for a removable installation, or the small holes for a fixed one. Make
sure the lock arrow on the plate is pointing down.
Step 2:
Depending on the material of the wall or ceiling, use proper tools to drill holes 25 mm deep
with a 6 mm drill bit where you marked. If the wall is made out of concrete, drill the holes first,
then insert the plastic anchors to support the screws.
Step 3:
Place the baseplate over the holes that are in the wall. Make sure to align the baseplate holes
with the holes in the wall. Use the supplied screws to attach the baseplate to the surface of
the wall.
D-Link DCS-2670L User Manual 14