Table of Contents
Advertisement
Camera User Manual
Click Current PC Time.
Manually setting the device time
− Click Set Manually.
− A time setting control is displayed.
− Set the date and time.
Step 5 Configure the NTP.
1. Click the button on to enable NTP.
2. Enter the IP address or domain name of the NTP server, the port number and the time interval.
Step 6 Click
.
The message "Apply success!" is displayed and the system saves the settings.
----End
Camera
Procedure
Step 1 Choose Configuration > Device > Camera.
The Camera page is displayed, as shown in Figure 4-8. Table 4-8 describes the parameters.
Parameter
Video System
Issue V1.0 (2023-02-10)
Camera Page
Camera parameters
Description
The options are as follows:
PAL: Used in Europe and China
mainland, India, Pakistan, etc.
NTSC: Used in USA, Japan, South
Korea, and Taiwan Province of
China, etc.
Configure the Device
Setting
[Setting method]
Select a value from the drop-
down list box.
[Default value]
PAL
NOTE
Whether the video system can
be changed depends on the
device model.
55
Advertisement
Table of Contents
