D-Link DCS-6314 User Manual page 40

Section 3: Configuration
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name /
Enter the username and password for your PPPoE
Password:
account. Re-enter your password in the Confirm
Password field. You may obtain this information
from your ISP.
HTTP Port:
The default port number is 80.
Access Name
The default name is video#.mjpg, where # is the
for Stream 1~3:
number of the stream.
HTTPS Port:
You may use a PC with a secure browser to connect
to the HTTPS port of the camera. The default port
number is 443.
Authentication:
Choose to enable or disable RTSP digest encryption.
Digest encryption uses MD5 hashes.
RTSP Port:
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify
the address of a particular stream. For instance,
live1.sdp can be accessed at rtsp://x.x.x.x/video1.
sdp where the x.x.x.x represents the ip address of
your camera.
Enable CoS:
Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
reservations.
Enable QoS: Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service
during busy periods. If the Network Camera is
connected to a router that itself implements QoS,
the router's settings will override the QoS settings
of the camera.
D-Link DCS-6314 User Manual 40