Image Setup - D-Link DCS-6314 User Manual

Section 3: Configuration
In this section, you may configure the video image settings for
your camera. A preview of the image will be shown in Live Video.
Enable Privacy The Privacy Mask setting allows you to specify
Mask: up to 3 rectangular areas on the camera's image
to be blocked/excluded from recordings and
snapshots.
You may click and drag the mouse cursor over
the camera image to draw a mask area. Right
clicking on the camera image brings up the
following menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
Mirror: This will mirror the image horizontally.
Flip: This will flip the image vertically. When turning
Flip on, you may want to consider turning Mirror
on as well.
Power Line: Select the frequency used by your power lines to
avoid interference or distortion.
White Balance: Use the drop-down box to change white balance
settings to help balance colors for different
environments. You can choose from Auto,
Outdoor, Indoor, Fluorescent, and Push Hold.
Changes the exposure mode. Use the drop-down
D-Link DCS-6314 User Manual

Image Setup

43