Software Installation - D-Link DCS-6314 User Manual

Section 2: Assembly and Installation

Software Installation

Step 1
Insert the Installation CD-ROM into your computer's optical
drive to start the autorun program.
The CD-ROM will open the Camera Installation Wizard. The
Setup Wizard will guide you through the installation process
through to configuring your camera.
Note:
If the autorun program does not automatically start on your
computer, go to Windows, click Start > Run. In the Run
command box type D:\setup.exe, where D: represents your
CD-ROM drive.
Step 2
Accept the End User Licence Agreement and follow the on
screen prompts to install the Camera Installation Wizard.
Step 3
Select your camera from the list, then click Wizard. If you
have multiple cameras, you can identify them by the MAC ID
printed on the label on the back of your camera.
D-Link DCS-6314 User Manual 25