D-Link DCS-6314 User Manual page 16

Section 2: Assembly and Installation
Step 3
Remove the mounting plate from the lower half of the camera
housing. It can now be attached to a wall or ceiling using the
mounting guide. Please see "Deploying the Camera" on page
13 for more instructions.
If you will be installing the camera onto a surface that cannot
house the cable, the cable access part can be removed so
that the cable can exit the camera housing easily. Once the
mounting plate has been removed, you will be able to remove
the cable access panel. If you will be routing the connection
cables through a wall or ceiling, it is recommended to leave
this part attached, as it will help protect the cable from
vandalism.
Step 4
Slide the lower half of the camera housing onto the mounting
plate and resecure it. Make sure that the cable sheath extends
out of the base in such a way that the cable is not kinked or
twisted.
D-Link DCS-6314 User Manual 16