Network Setup - D-Link DCS-6314 User Manual

Section 3: Configuration
Use this section to configure the network connections for your
camera. All relevant information must be entered accurately. After
making any changes, click the Save Settings button to save your
changes.
LAN Settings: This section lets you configure settings for your
local area network.
DHCP: Select this connection if you have a DHCP server
running on your network and would like your
camera to obtain an IP address automatically.
Static IP Client: You may obtain a static or fixed IP address and
other network information from your network
administrator for your camera.
IP Address: Enter the fixed IP address in this field.
Subnet Mask: This number is used to determine if the destination is
in the same subnet. The default value is 255.255.255.0.
Default The gateway used to forward frames to destinations
Gateway: in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different
subnet.
Primary DNS: The primary domain name server translates names
to IP addresses.
Secondary The secondary DNS acts as a backup to the primary.
DNS:
Enable UPnP Enabling this setting allows your camera to be
Presentation: configured as a UPnP device on your network.
Enable Enabling this setting allows the camera to add port
UPnP Port forwarding entries into the router automatically on
Forwarding: a UPnP capable network.
D-Link DCS-6314 User Manual

Network Setup

39