D-Link DCS-6314 User Manual page 41

Section 3: Configuration
Enable IPv6:
Enable the IPv6 setting to use the IPv6 protocol.
Enabling the option allows you to manually set up
the address, specify an optional IP address, specify
an optional router and an optional primary DNS.
Enable
The DCS-6314 allows you to multicast each of the
Multicast for
available streams via group address and specify the
stream:
TTL value for each stream. Enter the port and TTL
settings you wish to use if you do not want to use
the defaults.
After making any changes, click the Save Settings
button to save your changes.
D-Link DCS-6314 User Manual 41