Mounting The Camera - D-Link DCS-6314 User Manual

Section 2: Assembly and Installation

Mounting the Camera

The DCS-6314 is suitable for mounting to a wall using the
camera shoe and wire-in bracket provided.
Step 1
Remove the top part of the camera housing by using the
included tool to unscrew the three retaining screws.
Step 2
Once the cover has been removed, use a screwdriver to
remove the bottom mounting plate from the lower half of
the camera housing. The mounting plate is secured with three
screws positioned around the outer edge of the lower part
of the camera housing.
If you will be mounting the camera directly to a wall or ceiling,
please continue to the next page.
If you will be mounting the camera using the pendant mount,
please refer to "Attaching the Camera to the Pendant Mount"
on page 18.
If you will be mounting the camera using the bent mount,
please refer to "Attaching the Camera to the Bent Mount" on
page 20.
D-Link DCS-6314 User Manual 15