Section 2: Assembly and Installation
Orienting the Camera
The DCS-7513 can be adjusted to ensure an optimal viewing position when mounted to a wall by following the steps outlined.
Step 1
Using the Allen Wrench provided, loosen the adjusting bolts on both sides of
the camera shoe. This will allow you to adjust the vertical orientation of the
camera.
Step 2
1
Firmly tighten the adjustment bolts on both sides of the camera shoe.
Step 3
Using the Allen Wrench provided, loosen the adjusting bolts on both sides of
the cable management bracket. This will allow you to adjust the horizontal
3
orientation of the camera.
Step 4
Firmly tighten the adjustment bolts on both sides of the cable management
bracket.
D-Link DCS-7513 User Manual
17