Exhaust Filter Replacement - Kenmore 116.31040 Use & Care Manual

EXHAUST FILTER REPLACEMENT
The HEPA exhaust filter must be replaced
when dirty. It should be replaced
regularly depending on use conditions.
The filter CANNOT be washed as it wlll
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number.
1. Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating out
from vacuum
cleaner.
'2. Remove
the filter
cartridge
from cover.
3. Place new filter cartridge into cover
making sure that airflow arrow on side of
cartridge points into cover.
Place foam seal of filter against the
vacuum cleaner body.
Exhaust
Filter
Seal Against
Vacuum Cleaner
Bod'
-_ Exhaust
Filter
4. Replace the exhaust filter cover by
placing bottom tabs in slots and rotating
in until cover snaps into place.
AGITATOR CLEANING
To maintain efficient cleaning, the agita-
tor must be kept free of carpet fiber,
string, or hair build-up. After every 7 to
10 uses, unplug and turn vacuum cleaner
over and check agitator for fiber and hair
build-up.
Use scissors to remove any build-up en-
tangled around the agitator,
-21 -