Download  Print this page

Exhaust Filter Replacement; Agitator Cleaning - Kenmore COIZDMWOOU00 - KC01ZDMWZOUO Use & Care Manual

Hide thumbs

Advertisement

Table of Contents
EXHAUST
FILTER REPLACEMENT
J
The HEPA exhaust
filter must be replaced
3. Place new filter cartridge
into cover
when dirty,
It should be replaced
making
sure that airflow
arrow on side of
regularly
depending
on use conditions,
cartridge
points into cover,
The filler CANNOT
be washed as it wilt
Place foam seal of filter against the
lose its dust trapping ability,
Note: See PARTS AND FEATURES
for the exhaust filter number,,
1, Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating
out
from vacuum
cleaner,
2. Remove the
filter cartridge
from cover,
Cov_*r
Release
Tab
vacuum
cleaner
body.
Exhaust
FHtor
4. Replace the exhaust filter cover by
placing bottom tabs in slots and rotating
in until cover snaps into place,
l
AGITATOR CLEANING
1
To maintain
efficient cleaning, the agitator
must be kept free of carpet fiber_ siring, or
hair build-up. After every 7 to 10 uses,
unplug and turn vacuum cleaner over and
check agitator for fiber and hair build_up.
Use scissors to remove any build-up entan-
gled around the agitator.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.31811