Kenmore 116.31040 Use & Care Manual page 7

ATTACHMENT ASSEMBLY
HOSE AND WAND
1. Insert the tab on Hose "_
the telescopic wand Handle_ \\ 1
into the "J" slot on the
hose handle. Twist "J"Slot
the telescopic wand _-_-,_
to lock in place. ,_
'2. Place the tele- t_
scopic wand in the
wand holder and Telescopic
route the hose as Wand_--4
shown,
J
Raised
Edge
Hose I
Handle-
3. Snap the
hose handle
into the hose
holder located
on the handle
of the vacuum
cleaner.
NOTE: Be sure
the raised edge
of the hose
handle rests
against edge of
the hose holder.
4. Rotate the
hose release
lever down
and route the
hose as
shown.
5. Snap the
hose into the
hose cuff on
the side of
the vacuum
cleaner
Hose
Telescopic
Wand
Hose
Release
Lever-_-__
6. Rotate the hose
release lever
upwards to lock
the hose in place.
_L, CAUTION
Do not operate the agitator without
the wand property inserted into the
wand holder and the hose handle
properly secured in the hose holder
-7-