Exhaust Filter Replacement; Agitator Cleaning - Kenmore 116.39055 Use & Care Manual

EXHAUST FILTER REPLACEMENT t
The HEPA exhaust filter must be replaced
when dirty, tt should be replaced regularly
depending on use conditions,
The filter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number,
1. Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating out from
vacuum cleaner.
Cover
Release
Tab
2. Remove the filter cartridge from cover
3. Place new filter cartridge into cover
making sure that airflow arrow on side of
cartridge points into cover
Place foam seal of filter against the
vacuum cleaner body.
Exh a us t
Filter
Seal Against
Vacuum Cleaner
Body--_
Exhaust
Filler
4. Replace the exhaust filter cover by
placing bottom tabs in slots and rotating in
until cover snaps into place
_s_j
[
AGITATOR CLEANING
To maintain efficient cleaning, the agitator
must be kept free of carpet fiber, string, or
hair build-up. After every 7 to !0 uses,
unplug and turn vacuum cleaner over and
check agitator for fiber and hair build-up.
Use scissors to remove any build-up entan-
gled around the agitator.
]
21