Table of Contents
Advertisement
OSD Setup
■
On Screen Display
This preference determines whether operation details
are displayed on-screen when an AV receiver function is
adjusted.
On:
Displayed.
Off:
Not displayed.
Even when "On" is selected, operation details may not be
output if the input source is connected to an HDMI IN.
■
TV Format (Australian models)
For the on-screen setup menus to display properly, you
must specify the TV system used in your area.
Auto:
Select this to automatically detect the TV system
from the video input signals.
NTSC:
Select this if the TV system in your area is NTSC.
PAL:
Select this if the TV system in your area is PAL.
■
Language
English, Deutsch, Français, Español, Italiano, Ned-
erlands, Svenska,
This setting determines the language used for the on-
screen setup menus.
12V Trigger A/B/C Setup
See "Using the 12V Triggers"
Hardware Setup
Main menu
Remote ID
■
Remote ID
1, 2, or 3
When several Integra/Onkyo components are used in
the same room, their remote ID codes may overlap. To
differentiate the AV receiver from the other compo-
nents, you can change its remote ID from "1", to "2" or
"3".
Note
• If you do change the AV receiver's remote ID, be sure to change
the remote controller to the same ID (see below), otherwise, you
won't be able to control it with the remote controller.
Changing the Remote Controller's ID
1
While holding down Receiver, press and hold
down Setup until the Remote indicator lights
(about 3 seconds)
2
Use the number buttons to enter ID 1, 2, or 3.
The Remote indicator flashes twice.
En
56
(➔
64).
Hardware Setup
(➔
43).
Multi Zone
See "Zone 2" for more detail
Tuner
For FM/AM tuning to work properly, you must specify the
FM/AM step used in your area. Note that when this setting
is changed, all radio presets will be deleted.
■
FM/AM Frequency Step (North American
models)
200k/10kHz:
Select if 200 k/10 kHz steps are used in your area.
50k/9kHz:
Select if 50 k/9 kHz steps are used in your area.
■
AM Frequency Step (Australian models)
10kHz:
Select if 10 kHz steps are used in your area.
9kHz:
Select if 9 kHz steps are used in your area.
SIRIUS Settings (North American models)
See the separate Satellite Radio Guide for more informa-
tion.
■
SAT Radio Mode
If you connect a SIRIUS Satellite Radio antenna to the
AV receiver (sold separately), set this setting to "SIR-
IUS".
■
Antenna Aiming
■
SIRIUS Parental Lock
These items are for use with SIRIUS Satellite Radio.
It's not available if "SAT Radio Mode" is set to
"None".
HDMI
■
Audio TV Out
Off:
HDMI audio is not output.
On:
HDMI audio is output.
This preference determines whether audio received at the
HDMI IN is output by the HDMI OUT. You may want to
turn this preference on if your TV is connected to the
HDMI OUT and you want to listen to the audio from a
component that's connected to an HDMI IN, through your
TV's speakers. Normally, this should be set to "Off".
Note
• If
"
On
"
is selected and the audio can be output from the TV, the
AV receiver will output no sound through its speakers. In this
case, "TV Sp On" appears on the display.
• When
"
TV Control
"
is set to
"
"
to
Auto
.
• With some TVs and input signals, no sound may be output even
"
when this setting is set to
On
• When the "Audio TV Out" setting is set to
➔
"
"
(
)
trol" is set to
On
58
and you're listening through your
TV's speakers
(➔
17), if you turn up the AV receiver's volume
control, the sound will be output by the AV receiver's front left
61).
(➔
➔
(
)
"
On
"
58
, this setting is fixed
"
.
"
"
"
On
, or
TV Con-
Hide quick links:
Advertisement
Table of Contents
