Integra DTR-30.2 Instruction Manual page 53

Picture Adjust
Using Picture Adjust, you can adjust the picture quality
and reduce any noise appearing on the screen.
To view the TV picture while setting, press Enter. To
return to the previous screen, press Return.
Note
• If you are using the analog RGB input, the following settings are
"Film Mode"
not available:
"Noise Reduction"
.
■
Game Mode
Off:
Game Mode off.
On:
Game Mode on.
If video signal delay occurs during playback on a video
component (i.e. game console), select the corresponding
input source and set the "Game Mode" setting to "On".
The delay will decrease but in return the picture quality
will become poor.
■
Wide Mode
*1*2
This setting determines the aspect ratio.
Note
• When the "Game Mode" is set to "On", this setting is fixed at
"Full".
4 : 3:
"Edge Enhancement"
, , and
Full:
Zoom:
Wide Zoom:
Auto:
According to the input signals and monitor output
setting, the AV receiver automatically selects the
"4 : 3", "Full, "Zoom" or "Wide Zoom". For the
monitor output setting (➔ 44).
En
53