Connecting A Power Amplifier - Integra DTR-30.2 Instruction Manual

Connecting a Power Amplifier

If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT
jacks, and connect all speakers and the subwoofer to the power amplifier. If you have a powered subwoofer, connect it to
this AV receiver's PRE OUT: SUBWOOFER jack. You can connect the powered subwoofer with two PRE OUT:
SUBWOOFER jacks respectively. The same signal is output from each jack.
Power amplifier
1 2 3
1. Front left speaker
2. Center speaker
3. Front right speaker
4. Surround left speaker
5. Surround right speaker
6. Surround back/Front wide/Front high left speaker
7. Surround back/Front wide/Front high right speaker
Note
"None" for the channel that you don't want to output in
*1 Specify
"Speaker Configuration" (
4 5 6 7
➔
).
46
*1
*1
Powered subwoofer
"Connecting a powered Sub-
See
14) for more informa-
woofer" (➔
tion
En
15