Integra DTR-30.2 Instruction Manual page 31

Hide thumbs Also See for DTR-30.2:
Table of Contents

Advertisement

2
Use / to select a channel.
You can also use
/
Channel name
Category Search mode
1
Press Tuner, and then press Enter repeatedly to
select Category Search mode.
2
Use
/
to select a category, and / to select a
channel in that category.
Direct tuning
You can select a SIRIUS Satellite Radio channel directly
by entering its number.
1
Press Tuner followed by D.TUN.
2
Within 8 seconds, use the number buttons to enter
the channel number.
For example, to select channel #20, press 0, 2, 0, or
2, 0, Enter.
Note
• If you select an unavailable channel, "INVALID CHANNEL"
appears on the display.
• If you select a channel that you are not subscribed to, "CALL
SIRIUS" appears on the display.
• Channels that are locked must be unlocked before you can listen
to them. See "SIRIUS Parental Lock"
tion.
Selecting the previous channel
Press Return to select the previous channel.
Selecting Channels on the AV Receiver
1
Press Tuner repeatedly to select "SIRIUS".
2
Press Tuning Mode repeatedly to select Channel
Search mode or Category Search mode.
3
Press Enter repeatedly to select a category.
4
Use Tuning / to select a channel.
In Channel Search mode, you can select any channel.
In Category Search mode, you can only select chan-
nels from the currently selected category.
to select a category.
(➔
31) for more informa-
Presetting SIRIUS Satellite Radio Channels
You can store a combination of up to 40 of your favorite
SIRIUS Satellite Radio channels and FM/AM radio sta-
tions as presets.
1
Tune into the SIRIUS channel that you want to
store as a preset.
2
Press Memory on the AV receiver.
The preset number flashes.
3
While the preset number is flashing (about 8 sec-
onds), use Preset
select a preset from 1 through 40.
4
Press Memory on the AV receiver again to store
the channel.
The channel is stored and the preset number stops
flashing.
Repeat this procedure for all of your favorite SIRIUS
Satellite Radio channels.
Selecting presets
To select a preset, use Preset
receiver or the remote controller's CH +/–.
Tip
• You can also use the number buttons to select a preset directly.
Deleting presets
1
Select the preset that you want to delete.
See the previous section.
2
While holding down Memory press Tuning
Mode on the AV receiver.
The preset is deleted and its number disappears from
the display.
SIRIUS Parental Lock
With SIRIUS Parental Lock, you can lock out channels
that you do not want to receive and use a 4-digit PIN num-
ber to prevent others from unlocking them.
1
Press Receiver followed by Setup.
The main menu appears onscreen.
2
Use / to select "7. Hardware Setup", and then
press Enter.
The "Hardware Setup" menu appears.
7. Hardware Setup
1. Remote ID
2. MultiZone
3. Tuner
4. HDMI
5. Network
3
Use / to select "3. Tuner", and then press
Enter.
/
on the AV receiver to
/
on the AV
En
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents