Advanced Operations; Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Integra DTR-30.2 Instruction Manual

Advanced Operations

Advanced Setup

On-screen Setup Menus

The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT. If your TV is con-
nected to the composite video MONITOR OUT or the
COMPONENT VIDEO OUT, use the AV receiver's
display when changing settings.
This manual describes the procedure using the
remote controller unless otherwise specified.
MENU
MENU
1. Input/Output Assign
2. Speaker Setup
1. Input/Output Assign
3. Audio Adjust
2. Speaker Setup
4. Source Setup
3. Audio Adjust
5. Listening Mode Preset
4. Source Setup
6. Miscellaneous
5. Listening Mode Preset
7. Hardware Setup
6. Miscellaneous
8. Remote Controller Setup
7. Hardware Setup
9. Lock Setup
8. Remote Controller Setup
9. Lock Setup
Input/Output Assign
44)
(➔
1. Input/Output Assign
1. Monitor Out
1. Input/Output Assign
2. HDMI Input
3. Component Video Input
1. Monitor Out
4. Digital Audio Input
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
Speaker Setup (➔ 45)
2. Speaker Setup
1. Speaker Settings
2. Speaker Setup
2. Speaker Configuration
3. Speaker Distance
1. Speaker Settings
4. Level Calibration
2. Speaker Configuration
5. Equalizer Settings
3. Speaker Distance
6. THX Audio Setup
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
Audio Adjust (➔ 48)
3. Audio Adjust
1. Multiplex/Mono
3. Audio Adjust
2. Dolby
3. DTS
1. Multiplex/Mono
4. Audyssey DSX
2. Dolby
5. Theater-Dimensional
3. DTS
6. LFE Level
4. Audyssey DSX
5. Theater-Dimensional
Source Setup (➔ 50)
6. LFE Level
4. Source Setup
1. Audyssey
4. Source Setup
2. IntelliVolume
3. A/V Sync
1. Audyssey
4. Name Edit
2. IntelliVolume
5. Picture Adjust
3. A/V Sync
4. Name Edit
5. Picture Adjust
Listening Mode
Preset (➔ 55)
5. Listening Mode Preset
1. BD/DVD
5. Listening Mode Preset
2. VCR/DVR
3. CBL/SAT
1. BD/DVD
4. GAME
2. VCR/DVR
5. PC
3. CBL/SAT
6. AUX
4. GAME
7. TUNER
5. PC
8. TV/CD
6. AUX
9. PORT
7. TUNER
8. TV/CD
Miscellaneous (➔ 55)
6. Miscellaneous
1. Volume Setup
6. Miscellaneous
2. OSD Setup
3. 12V Trigger A Setup
1. Volume Setup
4. 12V Trigger B Setup
2. OSD Setup
5. 12V Trigger C Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
Hardware Setup
5. 12V Trigger C Setup
(➔ 56)
7. Hardware Setup
1. Remote ID
7. Hardware Setup
2. Multi Zone
3. Tuner
1. Remote ID
4. HDMI
2. Multi Zone
5. Network
3. Tuner
4. HDMI
5. Network
Remote Controller
Setup (➔ 70)
8. Remote Controller Setup
1. Remote Mode Setup
8. Remote Controller Setup
1. Remote Mode Setup
Lock Setup (➔ 58)
9. Lock Setup
Lock
9. Lock Setup
Lock

Common Procedures in Setup Menu

Enter
/ / /
Setup
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into nine catego-
ries on the main menu.
Carry out the settings by using the on-screen display.
1
Press Receiver followed by Setup.
The following menu appears.
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Tip
• If the main menu doesn't appear, make sure the appropri-
ate external input is selected on your TV.
2
Use / to select a menu, and then press Enter.
3
Use / to select target and then press Enter.
4
Use / to select to change the setting.
Press Setup to close the menu.
Press Return to return to the main menu.
Note
• This procedure can also be performed on the AV receiver by
using Setup, arrow buttons, and Enter.
• During Audyssey 2EQ ® Room Correction and Speaker Setup,
messages, etc., that are displayed on the TV screen will appear
in the Display.
Remote indicator
Receiver
Return
En
43