Manually Setting Stations Into Memory - Eclipse CD8061 Owner's Manual

How to operate the tuner
[MODE] button
[ TU ]
button
2 .
•Press any numbered button to select the station whose
frequency is indicated right above the button.
•When a new station is set in memory, the station previously
set in memory will be deleted.
•If there are fewer than six receivable stations, the stations
set in the remaining buttons will be retained.

Manually setting stations into memory

This section covers the setting of stations in memory under
the numbered buttons.
1 .
2 .
48
Buttons [1] to [6]
Press the [MODE] button for more than two
seconds until a beep is heard.
The automatic preset mode starts.
The [ASM] indicator on the screen flashes, and stations
are automatically entered in memory under buttons [1]
to [6].
These buttons are called preset buttons.
Press the [ BND ] button to switch between
FM and AM.
Use the [ TU ] button to tune to the station
to be entered in memory.
[ BND ] button