D-Link VoIP Wireless Router DVG-G5402SP User Manual page 65

DVG-G5402SP User's Manual
3-2-4-2 Access Control
The Access Control setting provides a service that you can control different access rights for different
wireless clients connected to your VoIP Router. The local and remote stations are limited to access
Internet through your Access Points using MAC address of wireless client. Choose the appropriate
Access Control Services from Wireless Access Control Mode option.
ADVANCED -> Advanced Wireless -> Access Control
Access Control Mode--
Disable: The VoIP Router does not response to any access rules. You are not allowed to make
configuration changes on this page.
Allow: When Allow Listed is enabled, only those wireless clients whose MAC addresses are in the
Access Control List have rights to connect to your Access Point.
Deny: When Deny Listed is enabled, only those wireless clients whose MAC addresses are in the
Access Control List will be blocked and restricted access to your Access Point.
MAC Address: Specify the MAC address which you want to allow/deny access your Access Point.
Comment: The space is reserved for comment or notation.
D-Link Systems, Inc.
65
ADVANCED