D-Link VoIP Wireless Router DVG-G5402SP User Manual page 46

DVG-G5402SP User's Manual
3-2-1-9 Hot Line
ADVANCED → VoIP → Hot Line
Hot Line: Check to direct the call automatically to a pre-configured destination without any action when
the FXS is off-hook. (ie. as the user picks up the phone). When the FXS is under Hot Line mode, no
other phone numbers can be dialed.
Hot Line No.: Enter the number for pre-defined destination.
Warm Line: Enter the time for the call to start with a pause, so the user can dial another number. The
call will be automatically directed to the pre-configured destination within timeout period.
VoIP Call Allow PSTN In: it is used only on Phone 1. Check the box to allow an incoming waiting call
from PSTN while VoIP call is in use. To enable this feature, following settings need to be done first:
1. Tick VoIP Call Allow PSTN In to allow a waiting call from PSTN.
2. Tick Call Hold to hold the VoIP call when pressing the FLASH button on the phone set. (Calling
Feature → Call Hold).
D-Link Systems, Inc.
46
ADVANCED