FUNAI FDR-90E Owner's Manual page 37

8
Select the channel number to
record using K / L buttons,
then press B button.
Setup > Recording > Timer Programming
Date Start End CH
1. JAN/12 10:00PM 10:30PM CH8
2. - - -
To record from external input, L1
or L2.
9
Select a recording speed
using K / L buttons.
Setup > Recording > Timer Programming
Date Start End CH
1. JAN/12 10:00PM 10:30PM CH8
2. - - -
Refer to "Recording speed" on
page 28.
Checking, canceling, or correcting the timer programming
information
1
Press POWER button so that
indicator disappears from
the front display.
2
Press VCR Plus+ button twice.
Timer Programming list will appear.
Setup > Recording > Timer Programming
Date Start End CH
1. JAN/12 10:00PM 10:30PM CH8
2. - - -
3
Check the information on the
list you will need.
To stop the timer recording in process
Press STOP C button on the front panel of the main unit.
STOP C button on the remote control is not effective.
Recording
Timer recording (cont'd)
10
Press ENTER button when all
information required is
entered. Your program setting
will be stored.
• To set another program, repeat
Speed
steps 5 to 10.
• To exit, press SETUP button.
11
Press POWER button to turn
off. indicator will appear on
the front display.
Speed
1H
4
To clear the timer programming,
select your desired program
using K / L buttons.Then,
CLEAR button.
To correct the timer program-
ming, select your desired pro-
gram using K / L buttons.Then,
press ENTER button. Next, cor-
rect the timer programming by using
Speed press K/L/{/B buttons.
1H
Finally, press ENTER button again.
5
Press VCR Plus+ button to exit.
6
Press POWER button to return
to the timer standby mode.
OPEN/
POWER
11 CLOSE
.@/:
VCR Plus + ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
CLEAR SPACE
REPEAT CM SKIP ZOOM DISPLAY
MENU/LIST TOP MENU
8
9
RETURN SETUP
10
REC REC
MONITOR SPEED REC/OTR
SKIP CH
Note
• After step 11, the DVD
recorder will be turned on
automatically 2 minutes in
advance of the recording time
to start and waits to start.
Then the recording will start
at the recording time you set.
1
OPEN/
POWER
CLOSE
6
.@/:
VCR Plus + ABC DEF
2
GHI JKL MNO
5
PQRS TUV WXYZ
CLEAR SPACE
4
REPEAT CM SKIP ZOOM DISPLAY
MENU/LIST TOP MENU
RETURN SETUP
Note
• Press VCR Plus+ button to
check the timer programming
in process.
When the timer recording is
proceeding, that program will
be highlighted with red. In this
case, you cannot select any
other program.
4
37