Table of Contents
Advertisement
• When you change the connections, all devices should be turned off.
• Refer to each owner's manual for further information on other devices.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
DVD Recorder
AUDIO OUT
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15 cm or more when storing them.
• Use a cable which is 3 m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
Connections
Connection to an Audio System
Analog audio
input jacks
OUTPUT
1
R
AUDIO
L
or
OUTPUT
AUDIO
R
L
2
Method 2
Dolby Digital decoder, DTS
decoder, MD deck or DAT deck
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
Note
• If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder and set "Dolby Digital" to
"Stream" for the "Digital Out" setting in the SETUP
menu. (Refer to pages 92-93.)
• If output is DTS encoded audio, connect to a DTS
decoder and set "DTS" to "ON" for the "Digital Out"
setting in the SETUP menu. (Refer to pages 92-93.)
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by
an MD or DAT deck.
• Unless connected to a Dolby Digital decoder or a DTS
decoder, set "Dolby Digital" to "PCM" and "DTS" to "OFF"
for the "Digital Out" setting in the SETUP menu. Playing a
DVD using incorrect settings may generate noise distor-
tion and may also damage the speakers. (Refer to pages
92-93.)
• Set "Dolby Digital" to "PCM" for the "Digital Out" set-
ting in the SETUP menu for connecting to an MD deck
or DAT deck. (Refer to pages 92-93.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1
channel surround sound as heard in the movie theaters.
• By hooking this unit up to the DTS decoder, you can
enjoy 5.1 channel surround system which reproduces the
original sound as truthfully as possible. 5.1 channel sur-
round system is developed by the Digital Theater System,
Inc.
Digital audio
input jacks
COAXIAL
OPTICAL
Audio Optical
Digital cable
or
(commercially
available)
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL O P T I C A L
15
Advertisement
Table of Contents
