Guide Channel Setting - FUNAI FDR-90E Owner's Manual

Guide channel setting

First, fill in the boxes on this page:
1.
Write your local channel numbers in "TV Channel"
column, which you can receive in your area by
channel preset.
2.
Write local TV stations corresponding TV Channel
in "Call letters" column, and write guide channel
numbers corresponding call letters in "Guide
Channel" column, consulting your TV guide maga-
zine or the TV listings of your local newspaper.
Now, compare the channel numbers you have writ-
ten in the Guide Channel and TV Channel columns.
You must set all of these channel numbers that
don't match using the following procedure before
you program the automatic timer recording using
the VCR Plus+ system.
• This setting only needs to be set once, but must
be done again if you have moved to a different
area and channel numbers have been changed.
1
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Setup Menu
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
20
Getting started
Channel setting (cont'd)
Call letters
(Local TV station)
Setup
Playback Setting
3
Select "Channel" using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
Auto Preset
Manual Preset
Guide Channel Setting
TV Audio Select
Channel Line-Up Chart
Guide Channel
(Guide channel number)
2
3
Stereo
TV Channel
(Local channel number)
OPEN/
POWER
CLOSE
.@/:
VCR Plus + ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
CLEAR SPACE
REPEAT CM SKIP ZOOM DISPLAY
MENU/LIST TOP MENU
RETURN SETUP
1
REC REC
MONITOR SPEED REC/OTR
SKIP CH
STOP PLAY
REV FWD
PAUSE