Table of Contents
Advertisement
Video
DVD-R
DVD-R
DVD-RW
DVD-RW
Follow the steps below to record
TV programs.
1
Turn on the DVD recorder
and load a recordable disc.
Make sure that the TV input is set
on the DVD recorder.
This operation may take a
while to be recognized.
2
Select a recording speed
using REC SPEED button.
SP 2:01 Rem.
Refer to "Recording speed" on
page 28.
3
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 30-32.
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
"Video mode" has been selected
as the default. Refer to "Settings
for the recording format to a
blank disc" on pages 30-32.
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
Recording
Basic recording
VR
DVD-RW
DVD-RW
4
Select a desired channel to
record using CH K / L but-
tons or number buttons.
5
Press REC/OTR button to
start recording.
REC mark will be displayed for 5
seconds.
I
To pause the recording, press
PAUSE F button. Press REC/OTR
button to restart the recording.
6
Press STOP C button to stop
the recording.
This operation may take a
while to be completed.
POWER
VCR Plus +
CH 1
REPEAT
MENU/LIST
RETURN
2
6
Note
• Recording starts immediately
and continues until the disc
becomes full or you stop
recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
• You cannot mix two for-
mats on one DVD-RW disc.
When you load a disc once
recorded before, the
recording format cannot be
changed even if you change
it in SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
OPEN/
CLOSE
.@/:
ABC
DEF
GHI
JKL
MNO
4
PQRS
TUV
WXYZ
CLEAR
SPACE
CM SKIP
ZOOM
DISPLAY
TOP MENU
SETUP
REC
REC
5
MONITOR
SPEED
REC/OTR
SKIP
CH
4
STOP
PLAY
REV
FWD
PAUSE
5
33
Advertisement
Table of Contents
