Removing The Power Supply; Replacing The Power Supply - Dell OptiPlex XE Small Form Factor Service Manual

Back to Contents Page
Power Supply
Dell™ OptiPlex™ XE Service Manual—Small Form Factor
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Power Supply

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Remove the optical drive.
3. Remove the hard drive.
4. Remove the back thermal sensor.
5. Remove the fan.
6. Disconnect the power cables from the system board.
7. Pull up the power supply release latch and slide the power supply toward the front of the computer.
8. Remove the power supply from the computer.

Replacing the Power Supply

To replace the power supply, perform the above steps in reverse order.
Back to Contents Page
Computer.