Back to Contents Page
Memory
Dell™ OptiPlex™ XE Service Manual—Small Form Factor
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Memory
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your
2. Remove the
optical
drive.
3. Remove the
hard drive
assembly.
4. Press down on the memory retention clips to release the memory module.
5. Lift the memory module out of its connector and remove it from the computer.
Replacing the Memory
To replace the memory module, perform the above steps in reverse order.
Back to Contents Page
Computer.
Need help?
Do you have a question about the OptiPlex XE Small Form Factor and is the answer not in the manual?
Questions and answers