Thank you for purchasing the Integra 2 Channel
Amplifier.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new 2 Channel Amplifier.
Please retain this manual for future reference.
Contents
Before using
Precautions ............................................................ 3
Features ................................................................. 4
Facilities and connections
Operations ........................................................... 10
Appendix
Specifications ...................................................... 11
4
Features
- Exclusive Onkyo VL Technology
- Separate Transformers for L/R Channels
- New Custom-Designed, Audio-Tuned Reference
Capacitors
- Perfect for Second Zone and Distributed Audio
Applications
- Low-Impedance Copper Bus Plates for Perfect
Ground Potential
- Hi-Rigidity, Anti-Resonant Flat Chassis (1.6 mm
Thick)
- 19mm-Pitch Audio Terminals for High-Grade
Cable
- North American model:
100 W 2 ohm 2 ch Driven 1 kHz 0.8 %THD (FTC)
Other models:
40 W 8 ohm 2 ch Driven 1 kHz 0.8 %THD (IEC)
80 W 4 ohm 2 ch Driven 1 kHz 0.8 %THD (IEC)
- Input Level Adjustment
- Audio Sensing Level Control (-6 dB-0 dB) and
On / Off Switch
- 1 Audio Input and 1 Output
- 12V Trigger In / Out and 12V Remote On / Off
Switch
- Auto on Function (On/Off Control for Audio Sense
and 12V Trigger)
- Gold-Plated, Banana Plug-Compatible Transparent
Speaker Posts
- Heavy-Duty Inlet Power Cord
- Aluminum Front Panel
Supplied accessory
Check that the following accessory is supplied with the
ADM-30.1.
Power cord
North American model
Australian/European models :1.8m (5.9ft) ........... [1]
(Use a power cord designed for use in your region.)
In catalogs and on packaging, the letter at the end of
the product name indicates the color.
Specifications and operations are the same regardless
of color.
:1.8m (5.9ft) ........... [1]
2m (6.5ft) ........... [1]