Removing The Processor - Clevo D400S Service Manual

Disassembly

Removing the Processor

1. Turn off the computer, remove the battery (
2. Remove screws
3. Carefully lift up the memory socket cover
Figure 9
nect it).
4. Remove screws
Processor Removal
5. Carefully lift up the heat sink
a. Remove the screws.
b. Carefully lift the cover off
the computer.
c. Remove the screws in
the order indicated.
d. Remove the heat sink.
!
Reassembly Screw
Order
When replacing the
heat sink, make sure
you insert the screws
in the same order indi-
cated on the label.
!
7. Socket Cover
13. Heat Sink
• 10 Screws
2 - 16 Removing the Processor
- from the memory socket cover
1 6
- (Figure 9c) from the heat sink, in the order indicated on the label
9 12
(Figure 9d) off the computer.
13
1
a.
2 3
4
c.
11
10
page 2 - 8
) and turn it over.
.
(a fan cable is still attached to the mainboard and you can discon-
7 8
b.
6
7
5
d.
9
12
.
8
13