Removing The Wireless Lan Module - Clevo D400S Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, remove the battery (
2. Remove screws - from the memory socket cover
1 6
3. Carefully lift up the memory socket cover
nect it).
4. Remove screws - ( Figure 8c
9 10
5. Lift the Wireless Lan module
1
a.
2 3
4
c.
11
10
9
12
page 2 - 8
) and turn it over.
.
(a fan cable is still attached to the mainboard and you can discon-
7 8
), and carefully disconnect cables
( Figure 8d ) off the computer.
13
b.
6
5
d.
& .
11 12
8
7
13
Removing the Wireless LAN Module 2 - 15
Disassembly
Figure 8
Wireless LAN
Module Removal
a. Remove the screws.
b. Carefully lift the cover off
the computer.
!
Antenna Cable
Connection
When re-inserting a
Wireless LAN module,
make sure the antenna
cable connects to the
connector J1 which is
indicated as point 12
in Figure 8c.
!
7. Socket Cover
13. WLAN Module
.
• 8 Screws