Programming Options - Avital 5103 Owner's Manual

Programming options

Programming options control your system's normal, operational set-up. Most op-
tions do not require additional parts, but some may require installation labor.
The following is a list of the programmable options, with the factory settings in
Bold.
• Active arming
seconds after the last door has been closed).
• Arming/disarming siren
• The ignition controlled door lock feature on or
programmed on, the doors will lock three seconds after the ignition is
turned on, and unlock when the ignition is turned off. If your installer is pro-
gramming the security system with the Directed Bitwriter
unlock are independent features that can be programmed separately.
• Passive door locking (with passive arming) or
when arming with the transmitter). Passive locking allows the vehicle's
doors to lock when the security system passively arms (after the 30-sec-
ond countdown). This feature only works if passive arming has been pro-
grammed.
• Panic mode
have laws against sirens sounding in moving cars.)
• Forced passive arming
for passive arming and the forced passive arming feature has been pro-
grammed on, the system will passively arm after one hour, even if a pro-
tected entry has been left open. Forced passive arming ensures that the
system will be armed if a door has accidentally been left ajar when leav-
ing the vehicle.
When the system passively arms after one hour, the entry point that has
been left open, and anything connected to the same zone, is bypassed
and cannot trigger the system. However, the re main ing inputs to the system
are fully operational.
22
(transmitter only) or passive arming (automatic arming 30
chirps on or off.
enabled/disabled when the ignition is turned on. (Some states
on or off. If your security system is programmed
©2009 Directed Electronics. All rights
off: When this feature is
, ignition lock and
®
active door locking (only
reserved.