Fcc/Id Notice; Caution; Transmitter Functions; Standard Configuration - Avital 5103 Owner's Manual

➢Fcc/id notice

This device complies with Part 15 of FCC rules. Operation is subject to the fol-
lowing two con di tions: (1) This device may not cause harmful interference, and
(2) This device must accept any in ter fer ence re ceived, including in ter fer ence
that may cause undesirable op er a tion. Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority
to operate this device.

➢ Caution

This product is designed for fuel injected, automatic transmission vehicles only.
Use of this product in a standard transmission vehicle is dangerous and contrary
to the product's intended use.

Transmitter functions

The receiver uses a computer-based Learn Routine to learn the trans mit ter buttons.
This makes it possible to assign any remote transmitter button to any receiver
function. The transmitter initially comes programmed with Standard Configura-
tion, but may also be customized by an authorized dealer. The buttons in all of
the instructions in this manual correspond to a Standard Configuration transmit-
ter.

➢ Standard configuration

Button
The arming function is controlled by pressing this button for 1 second, if held for
2 seconds Panic is activated.
Button
The disarming function is controlled by pressing this button for 1 second.
© 2009 Directed Electronics. All rights reserved.
3