Running; Status Request When The Engine Is Not Running; Ready Mode Status Request - Autostart AS-3372 TW-FM User Manual

To retrieve the vehicle status:
Press and release the
The transmitter will then flash the corresponding sequence of LEDs, depending on the vehicle's
status.
If the engine is NOT running, refer to Table 1.
If the vehicle is in or out of ready mode, refer to Table 2.
If the engine IS running under a remote start, refer to Table 3.
The status request feature is a two-step procedure:
• The first sequence of flashes denotes if the vehicle's doors are locked or unlocked.
• The second sequence of flashes (if applicable) denotes if the vehicle is in Cold weather mode,
Home valet mode, or Valet mode.
• If there is no second-sequence transmission, then the vehicle is in none of the three (3)
mentioned features (Cold weather mode, Home valet mode or Valet mode).

Status Request When the Engine IS NOT Running

STATUS SEQUENCE
Lock
Unlock
1 sequence if
st
locked
Cold
1 sequence if
st
Weather
unlocked
2 sequence
nd
1 sequence if
st
locked
Home
1 sequence if
st
Valet
unlocked
2 sequence
nd
1 sequence if
st
locked
Valet
1 sequence if
st
Mode
unlocked
2 sequence
nd

Ready Mode Status Request

STATUS SEQUENCE
if locked
In Ready
Mode
if unlocked
1 sequence
st
if locked
1 sequence
Out of Ready
st
if unlocked
Mode
2 sequence
nd
User Guide
button then press and release the
AUX
LED #1
3 flashes
X
3 flashes
X
X
3 flashes
X
1 second
3 flashes
X
1 second
LED #1
3 flashes
X
3 flashes
X
X
TRUNK
LED #2 LED #3
X X
3 flashes X
X X
3 flashes X
X X
X X
3 flashes X
X X
X X
3 flashes X
X X
Table 1
LED #2 LED #3
X X
3 flashes X
X X
3 flashes X
X X
Table 2
button (there will be a beep).
LED #4
X
X
X
X
1 second
X
X
1 second
X
X
1 second
LED #4
X
X
X
X
4
Beep(s)
1
2
2
2
X
2
2
X
1
1
X
Beep(s)
1
2
1
2
4
P. 13