Audiovox XRO9100 Owner's Manual page 19

Auxiliary Selection
allows the naming of the outputs of your system. Your
security system may have additional functions that were connected at time of
installation, like right side slider door, left side slider door, Sun Roof Open or
Close,,,etc... You can name the function of the output for easy recall. Move the
side switch down 5 times to access the Aux page. Press the Lock (1) Unlock
(2) Start/Trunk (3) or Option (4) button to access the particular Aux Output
naming section. Enter letters by moving the side switch up or numbers by
moving the side switch down than press the lock (1) button to move to the next
letter, up to 12 characters may be entered. Once you have entered the text you
wish to appear, press the Start/Trunk button to save your selection. Repeat for
each Aux Output you wish to name.
Language Selection:
Finally the unit allows the selection of preferred language. You can select
English, Spanish, or French from the menu. Selecting one or the other will
allow the OLED to display your preferred text. Press the side switch down 6
times to access the language selection screen.
Make your choice by pressing Lock (1) for English, Unlock (2) for Spanish, or
Start/Trunk (3) for French. You also have the option to select "Set To Defaults"
by pressing the Option (4) button than following the on screen directions. This
selection will return the display to the defaults settings.
Page 19
128-8261
19 of 24