Hardware Installation - Aztech WL230USB-L User Manual

WL230USB-L 54Mbps Wireless 802.11b/g USB 2.0 Adaptor
2.9 Windows XP Warning Box
6. After the files have been successfully copied, the screen in Figure 3.0 will appear. Click the
Finish button to finish the wizard.
Figure 3.0 Finish
7. After installing the software, Please plug the Adaptor into your PC. If you need instructions as to
how to do this, please refer to section 2.2 hardware installation. If you have plugged it into you PC
already, please un-plug it and plug it back in. The OS will automatically detect the Adaptor and
automatically setup the driver for the Adaptor. If it does not, please follow the setup steps to finish
the driver installation.
After installing the driver successfully, you should see an icon, or , appear in your
system tray.

2.2 Hardware Installation

1. Connect one end of the USB cable to the Adaptor.
- 7 -