Advertisement
F.
Click Next.
G.
Click Install and wait for the installation of the
required driver to be finished.
H.
Click Finish to exit the wizard. Installation is now
complete.
4
STEP
D.
Click Next.
A.
After installing the software, you may now proceed
E.
If you selected the first option, please select either
to hardware installation by inserting the WL572USB
one of the options available:
to any USB port of your computer.
5
STEP
Connect to a Network
• Connecting to Non-Secured Wireless AP
A.
Click Available Network icon then Double click on the
desired AP from the list to automatically connect.
Hardware Installation
Available Network Icon
• Connecting to WEP-Secured Wireless AP
A.
Click Available Network icon then double click on the
selected AP from the list with WEP encryption.
• Connecting to WPA2-PSK Secured Wireless AP
A.
Click Available Network icon then double click on the
selected AP from the list with WPA2-PSK encryption.
B.
The Authentication and Encryption information will
appear. Click the arrow key to enter the WEP Key.
B.
The Authentication and Encryption information will
appear. Select WPA2-PSK as the Authentication Type.
C. Select TKIP or AES encryption on the Encryption
C.
Enter the key in the field as shown. The value must
drop down box then click the arrow key to enter the
be the same as the key set in the Access Point. Click
Passphrase key.
the arrow key to connect.
D.
Enter the key in the field as shown. The value must be
the same as the key set in the Access Point. Click the ar-
row key to connect.
Advertisement
