Table of Contents
Advertisement
Authentication Type – Three options, Open System, Shared-Key System or LEAP.
802.1x Setting – It enables when Authentication Type is setting to WPA.
Encryption – Displays which encryption type that the driver is using. When you select Open
System, Shared-Key System as Network Authentication, there are two options: WEP and
Disabled. If you select WPA-PSK as Network Authentication, there are TKIP and AES
options instead of WEP and Disabled.
Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal
digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits)
encryption. You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F) or 13
ASCII characters for 128-bit (also called 104bits) encryption.
3.2 Link Status
The Link Status tab displays the Adaptor's current status.
WL230USB-L
Figure 3-4 Add Profile – Authentication and Security
54Mbps Wireless 802.11b/g USB 2.0 Adaptor
- 12 -
Advertisement
Table of Contents
