Advanced; About - Aztech WL230USB-L User Manual

3.5 Advanced

On this Screen, you can configure the WEP key or view the configured WEP key.
Wireless mode - Displays the wireless mode, either 802.11B/G mix or 802.11B only.
B/G Protection - There are three options: either Auto or Enable, or Close.
TxRate - Shows the current Transfer rate.
TxBURST - It can translate more data when it enable.
Fast Roaming at - Roaming will disable when Transmit Power is below some dBm.
Turn off RF - The wireless radio of this Adaptor can be enabled or disabled. You can turn the
wireless radio off by selecting the check-box.
Apply - Click the Apply button to save the current setting.

3.6 About

This screen displays some information about this Adaptor, including Driver Date, Driver Version,
Utility Date, Utility Version, MAC Address, IP Address, SubMask, Power Save mode and
Preamble.
Utility Version - The version of this utility.
Utility Date - The creation date of this utility.
Driver Version - The version of the wireless network Adaptor driver.
Driver Date - The creation date of the wireless network Adaptor driver.
EEPROM Version - The version of this EEPROM.
IP Address - The IP address of the wireless network.
Phy_Address - The MAC address of the wireless network Adaptor.
SubMask - The subnet mask of the wireless network.
WL230USB-L 54Mbps Wireless 802.11b/g USB 2.0 Adaptor
Figure 3-8 Advanced
- 15 -