All manuals and user guides at all-guides.com
Easy Start Guide
Hardware Installation
You can install the HomePlug Wireless Adapter in several ways:
To connect the HomePlug Wireless Adapter with a computer:
1. Insert one end of an Ethernet cable from the computer's Ethernet port and then
insert the other end into the HomePlug Wireless Adapter's Ethernet port (
Note: When you connect the HomePlug Wireless Adapter with a computer, you have
Note:
Note:
Note:
to set the static IP Address in the computer's network card. For instructions, please
refer to
Configuring
2. Plug the HomePlug Wireless Adapter into the electrical outlet.
To connect the HomePlug Wireless Adapter with an existing network/router:
1. Insert one end of an Ethernet cable from the router's Ethernet port and then insert
the other end into the HomePlug's Ethernet port (
2. Plug the HomePlug Wireless Adapter into the electrical outlet.
Page 8 of 14
TCP/IP.
).
).
Need help?
Do you have a question about the Easy and is the answer not in the manual?
Questions and answers