Table of Contents
Advertisement
WL230USB-L
54Mbps Wireless 802.11b/g USB 2.0 Adaptor
•
PSM(Power Saving Mode ) - Power Saving mode.
Network Type – Displays the wireless mode, either Ad-hoc or Infrastructure mode
Preamble – Specifies the preamble setting in 802.11b. The default setting is Auto Switch
(access point mode), which allows both short and long headers in the 802.11b frames. The
Adaptor can only use short radio headers if the access point supports and uses them.
RTS Threshold – Default is 2312.
Fragment Threshold – Default is 2312.
Ad-hoc mode – Displays the wireless mode, either Only 802.11B or 802.11B/G mode.
Channel – Shows the current channel in use. This field determines which operating
frequency will be used.
Figure 3-3 Add Profile - configuration
2.
Edit the Authentication and Security tab
- 11 -
Advertisement
Table of Contents
